Receiving stations

MEMORY

BAND FM MODE ￿PRESET®￿

FM STEREO TUNER

PRESET

BAND

TIMER

MEMORY FM MODE

CLEAR

STANDBY/ ON

TUNING

†TUNING￿￿

DISPLAY CHARACTER

ACCUCLOCK

T-405TX

Listening to a stereo radio station

When you tune in a stereo FM station, the STEREO indicator lights up if the signal is sufficiently strong. If the signal is weak, you can still listen to the station in mono mode. In this case, tune in as follows.

1 Press the FM MODE button.

The MONO indicator lights up.

Selecting preset stations

Follow the procedure below to select a preset station stored in memory.

1 Select FM or AM using the BAND button. (only for U.S. and Canadian models) BAND

FM MODE

CLEAR

Displayed

Use the PRESET ￿ or ® button to select the desired preset station.

PRESET

MONO

MHz

Clearing preset stations

You can clear preset stations from the preset memory.

2 Select the station you would like to listen to using the TUNING † or ￿ button.

TUNING

18

1 Select the station as explained in the previous section.

2 Press and hold the MEMORY button and press the FM MODE button within a second.

“..... ..... ” appears on the display.

MEMORY FM MODE

CLEAR

Note

If you fail to press the FM MODE button while holding down the MEMORY button immediately, the AUTO MEMORY function will start operating.