Onkyo T-405TX manual 13

							TAPE
MEMORY						PAUSE/STEP DVD
			REPEAT	SCROLL			M D
TIMER	￿PRESET®￿		REPEAT	RANDOM	REC		C D
			PLAY MODE CLEAR
			MEMORY	CLEAR
					DISC
FM STEREO TUNER			REPEAT PLAY MODE				CDR
	PRESET
TIMER	MEMORY FM MODE
			TONE	CLEAR	REC
	CLEAR	TIMER
STANDBY/ ON							MUTING
	TUNING		TIMER	1	2	3		The remote con-
		UP/DOWN		4	5	6
	DISPLAY CHARACTER		UP/DOWN	7	8	9	VOLUME	troller comes with
ACCUCLOCK						PRESENCE
		ENTER				ACOUSTIC
	T-405TX		ENTER	--/---	10/0		RC-456Sthe Onkyo A-905TX
					REMOTE CONTROLLER

amplifier.

Before

The following procedures are based on the front panel of the T-405TX. However, you can also perform the procedure using the remote controller that comes with Onkyo A-905TX amplifier.

On the remote controller, press the “ENTER” button and “UP/DOWN” button instead of the “MEMORY” button and PRESET￿/® button respectively.

2 If “AUTO” appears on the display, press the MEMORY button. If “MANUAL” appears on the display, press the PRESET ￿ or ® button to select “AUTO,” then press the MEMORY button.

MEMORY

Using

Confirming/changing the RDS station used by ACCUCLOCK

If you wish to know which RDS station has been used to set the clock by ACCUCLOCK, or to use a different RDS station signal to set the clock, follow the steps below:

1 Press the TIMER button repeatedly until “ADJUST” is selected on the display, then press the MEMORY button.

TIMER

MHz

The example shown above indicates that the ACCUCLOCK function uses the RDS station whose information appears on the display (FM 88.10 MHz). If RDS station signals cannot be received successfully, “--.--” will appear instead of the radio frequency of the station. If you wish to change the selected RDS station or if no RDS station is selected, choose the desired RDS station by using the PRESET￿ or ® button, then press the MEMORY button.

Connections

Operation

MEMORY

“AUTO” or “MANUAL” appears on the display.

Information Other

13