BAND | MEMORY | |||||
|
| PRESET® | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FM STEREO TUNER |
|
|
|
|
|
|
|
|
| PRESET |
| ||
BAND | TIMER MEMORY FM MODE |
|
|
| ||
|
|
|
|
|
|
|
CLEAR
STANDBY/ ON
TUNING
†TUNING
DISPLAY CHARACTER
ACCUCLOCK
Presetting your favorite stations
You can store your favorite stations in the preset memory. Follow the procedure below:
1 Select FM or AM using the BAND button. (only for U.S. and Canadian models)
BAND
3 While “..... .....” is flashing, use the
PRESET or ® button to select the preset number into which to store the station frequency.
The preset number will flash on the display.
PRESET
Using Before
Use the TUNING † or button to select the frequency of your favorite station.
TUNING
To automatically scan the stations, hold down the TUNING † or button for more than
0.5seconds, then release the button. Scanning will stop when a station is tuned in.
2 Press the MEMORY button.
The MEMORY indicator lights up and “ | ..... ..... | |
” | ||
will flash. |
|
|
| MEMORY |
|
Lit | Flash |
|
MEMORY |
|
|
AUTO
MEMORY
MHz
Note
If you select a preset number into which a station has already been programmed, the number will flash rapidly. If you proceed with this number, the original station will be replaced by a new station.
4 While the number is flashing, press the MEMORY button.
The frequency will be stored into the selected preset.
| MEMORY |
Disappear | Selected preset |
number | |
| AUTO |
| MHz |
Notes
•Up to 30 stations can be stored in the preset memory.
•If the FM station received is an RDS station that has a PS (Program Service Name), the frequency display will change to the PS display. (Refer to page 22 for more information on the RDS function.)
RDS reception is available only on the European models.
Connections
Operation
Information Other
17