Onkyo TX-DS484 instruction manual Features, Supplied accessories, Declaration of Conformity

Features

■55 W/CH TO EACH OF THE FIVE CHANNELS INTO 8 OHMS, 20 Hz—20 kHz, 0.08% THD (North American models, FTC rating)

75 W/CH TO EACH OF THE FIVE CHANNELS INTO 6 OHMS, 1 kHz, DIN (European models, DIN)

100 W/CH TO EACH OF THE FIVE CHANNELS INTO 6 OHMS, 1 kHz, EIAJ (Asian models,EIAJ)

■WIDE RANGE AMPLIFIER TECHNOLOGY (WRAT)

■6-OHM, HIGH CURRENT, LOW-IMPEDANCE DRIVE FOR ALL 5 CHANNELS

■DISCRETE OUTPUT STAGE AMPS FOR ALL 5 CHANNELS

■2 HIGH QUALITY EXTRUDED HEAT SINKS

■OVERSIZED POWER TRANSFORMER

■LARGE, HIGH-QUALITY CAPACITORS

■A/B SPEAKER SELECTION

■DTS* AND DOLBY** DIGITAL DECODER ONBOARD

■DUAL BANANA-PLUG COMPATIBLE TERMI- NALS FOR ALL CHANNELS

■96-kHz/24-BIT DAC

■5.1 MULTICHANNEL INPUTS

■6 DSP SOUNDFIELDS

■3 ASSIGNABLE DIGITAL INPUTS (2 COAXIAL & 1 OPTICAL)

■LATE NIGHT MODE

■PRECISION SPEED-SENSITIVE DIGITAL VOL- UME CONTROL

■ABSOLUTE VOLUME DISPLAY

■30 FM/AM RANDOM PRESETS

■ALUMINUM FRONT PANEL

■FULL-FUNCTION REMOTE

*Manufactured under license from Digital Theater Systems, Inc. US Pat. No.5,451,942 and other worldwide patents issues and pending. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.© 1996 Digital Theater Systems, Inc. All rights reserved.

**Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.

Supplied accessories

Check that the following accessories are supplied with this unit.

AM loop antenna ⋅ 1 FM indoor antenna ⋅ 1

Remote controller (RC-427S) ⋅ 1

Batteries (size AA or UM-3) ⋅ 2

The following accessories are only available for worldwide models.

75/300 ohm antenna	Conversion plug (Shape may
adapter ⋅ 1	vary depending on the area
	which it was purchased.) ⋅ 1

Memory Preservation

This unit does not require memory preservation batteries. A built-in memory power back-up system preserves the contents of the memory during power failures and even when the unit is unplugged. The unit must be plugged in order to charge the back-up system.

The memory preservation period after the unit has been unplugged varies depending on climate and placement of the unit. On the average, memory contents are protected over a period of a few weeks after the last time the unit has been unplugged. This period is shorter when the unit is exposed to a highly humid climate.

Declaration of Conformity

We, ONKYO EUROPE ELECTRONICS GmbH

INDUSTRIESTRASSE 20 82110 GERMERING, GERMANY

declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3 (or EN60555-2, -3).

GERMERING, GERMANY

K.OTSU

ONKYO EUROPE ELECTRONICS GmbH

4