Tuning in a radio station
√ TUNING ®
STANDBY/ON
POWER
ON OFF
PHONES
|
| MASTER VOLUME |
| PARAMETER SELECTOR | UP |
STANDBY |
|
|
| PARAMETER CONTROLLER |
|
PRESET | TUNING |
|
A SPEAKERS | B | SURROUND MODE | LATE NIGHT |
| DIMMER | MEMORY FM MODE |
| ||
|
|
|
|
|
|
| CLEAR | BASS | TREBLE |
MULTI CH INPUT | DVD | VIDEO 1 | VIDEO 2 | TAPE | FM | AM | PHONO | C D |
|
AV RECEIVER
FM
AM FM MODE
1 |
|
FM | AM |
2 |
|
TUNING |
|
Manual tuning
1.Press the FM or AM button.
2.Use the TUNING √/® buttons to change the frequency.
® (up).............. the frequency increases.
√ (down) ......... the frequency decreases.
•The frequency changes in 50 kHz steps in FM and 10 kHz (or 9 kHz) in AM each time you press the TUNING √/® button.
•In FM, if this button is held continuously for more than 0.5 sec- onds, the frequencies are scanned automatically (FM auto tun- ing mode). When a broadcast is received, scanning stops.
Receiving RDS (European model only)
When an RDS (Radio Data System) station broadcasting PS (Pro- gram Service Name) information is received, the RDS indicator lights up and the name of the station is displayed.
•RDS reception is only available on the European model, and only in areas where RDS broadcasts are available.
MEMORY FM MODE
CLEAR 
Listening to a stereo radio station (FM mode)
When you tune in a stereo FM station, the FM STEREO indicator lights up if the signal is sufficiently strong.
If the signal is weak, it may be impossible to tune in to the desired station. In this case, tune in as follows.
Press the FM MODE button. The FM MUTE indicator turns off. At this time, the station will be in mono and interstation noise will be heard. Select the station to which you want to listen.
23
