Speaker setup
4 |
|
|
PARAMETER CONTROLLER | or |
|
|
| |
PARAMETER SELECTOR | or |
|
|
| |
5 |
|
|
PARAMETER CONTROLLER | or |
|
PARAMETER SELECTOR | or |
|
|
| |
6 |
|
|
|
| ft |
PARAMETER CONTROLLER | meter | feet |
| ||
|
| ft |
PARAMETER SELECTOR |
|
|
7 |
|
|
|
| ft |
PARAMETER CONTROLLER | or |
|
|
| ft |
PARAMETER SELECTOR |
|
|
8 |
|
|
|
| ft |
PARAMETER CONTROLLER | or |
|
|
| ft |
PARAMETER SELECTOR |
|
|
4. Press the PARAMETER SELECTOR® button to display the center speaker size parameter, and press the PARAME- TER CONTROLLER √/® buttons to select “LARGE”, “SMALL” and “NONE.”
Note:
If you have selected “SMALL” for the front speakers, you can select only “SMALL” or “NONE” for the center speaker. LARGE: When a large speaker is used as the center speaker. SMALL: When a small speaker is used as the center speaker. NONE: A center speaker is not connected.
5. Press the PARAMETER SELECTOR® button to display the surround speaker size parameter, and press the PARAMETER CONTROLLER √/® buttons to select “LARGE”, “SMALL” and “NONE.”
Note:
If you have selected “SMALL” for the front speaker, you can select only “SMALL” or “NONE” for the surround speakers. LARGE: When large speakers are used as the surround speaker.
SMALL: When small speakers are used as the surround speaker.
NONE: Surround speakers are not connected.
6. Press the PARAMETER SELECTOR® button to display the front speaker position parameter, and press the PARAMETER CONTROLLER √/® button repeatedly to set the distance value from your listening position to the front speaker.
Pressing the PARAMETER CONTROLLER® button repeatedly increases the value.
Pressing the √PARAMETER CONTROLLER button repeat- edly decreases the value.
Set the value closest to the actual distance.
7. Press the PARAMETER SELECTOR® button to display the center speaker position parameter, and press the PARAMETER CONTROLLER √/® buttons to set the center speaker position parameter.
• If you have selected “NONE” for the center speaker in step 4, you cannot set this parameter.
You cannot set the following values:
• Values larger than the front speaker position setting
• Values smaller than the value obtained by subtracting “5ft” from the front speaker setting
8. Press the PARAMETER SELECTOR® button to display the surround speaker position parameter, and press the PARAMETER CONTROLLER √/® buttons to set the sur- round speaker position parameter.
• If you have selected “NONE” for the surround speakers in step 5, you cannot set this parameter.
You cannot set the following values:
• Values larger than the front speaker position setting
• Values smaller than the value obtained by subtracting “15ft” from the front speaker setting
15
