Onkyo HT-R791 En-63, Remote Controller Setup, Lock Setup, Remote ID, Remote Mode Setup

Remote Controller Setup

1 2 3 4 “Setup” 5

Main Menu Remote Controller Setup

Remote ID

■Remote ID

`1, 2, or 3

When several Onkyo components are used in the same room, their remote ID codes may overlap. To differentiate the AV receiver from other components, you can change its remote ID from “1”, to “2” or “3”.

Note

•If you do change the AV receiver’s remote ID, be sure to change the remote controller to the same ID (see below), otherwise, you won’t be able to control it with the remote controller.

Changing the remote controller’s ID

1	While holding down RECEIVER, press and hold
	down Q SETUP until the remote indicator lights
	(about 3 seconds).
2	Use the number buttons to enter ID 1, 2, or 3.

The remote indicator flashes twice.

Remote Mode Setup

See “Looking up for Remote Control Codes” (➔ page 68).

Advanced Operations

Lock Setup

1 2 3 4 “Setup” 5

Main Menu Lock Setup

With this preference, you can protect your settings by locking the setup menus.

■Setup

`Locked

`Unlocked

When “Locked” is selected, the setup menus will be locked and you cannot change any setting.

En-63