Source Connection

This step checks the connection of source components.

1 Use q/wto select one of the following options, and then press ENTER.

`Yes, Continue: Performs the checkings.

`No, Skip:

Skips this step and continues to “Remote Mode Setup”.

2 Select the input selector for which you want to check the connection and press ENTER.

The picture of the corresponding source should appear on screen with a verification prompt.

3 When prompted, use q/wto select one of the following options and then press ENTER.

`Yes:

Confirms that the source is properly displayed. `No:

Displays an error report. Follow the troubleshooting instructions and recheck the source.

4 Use q/wto select one of the following options, and then press ENTER.

`Yes:

Returns to step 2.

`No, Done Checking:

The setup wizard continues to “Remote Mode

Setup”.

Remote Mode Setup

With this step, you can enter remote control codes for the components you want to operate.

1 Use q/wto select one of the following options, and then press ENTER.

`Yes:

Performs the remote control code input. Refer to step 5 of “Looking up for Remote Control Codes” (➔ page 68).

`No, Skip:

Skips this step and continues to “Network

Connection”.

2 When you’re finished, select one of the following options and press ENTER.

`Yes, Done:

The setup wizard continues to “Network

Connection”.

`No, not yet:

You can enter other remote control codes.

Turning On & Basic Operations

Network Connection

This step checks your network connection.

1 Use q/wto select one of the following options, and then press ENTER.

`Yes:

Performs the checkings.

`No, Skip:

Skips this step and terminates the initial setup.

Note

•If you use both wired and wireless network connections, the wireless will take priority.

For further details, see the instruction manual provided with your wireless device.

2 Follow the instructions on screen to perform the network checking.

The checking is complete when the message

“Successfully connected.” appears at the middle of the screen. Press ENTER to terminate the initial setup.

3 If an error message appears, select one of the following options and press ENTER.

`Retry:

Performs the checking again. `No, Do it Later:

Skips this step and terminates the initial setup. The setup wizard goes to “Terminating the Initial Setup”.

Terminating the Initial Setup

This step ends the initial setup process.

1 Press ENTER.

To restart the initial setup, select “Initial Setup” in the “Hardware Setup” menu (➔ page 62).

En-21

Page 20 Page 22
Page 21
Image 21
Onkyo HT-R791 En-21, Source Connection, Remote Mode Setup, Network Connection, Terminating the Initial Setup
Page 20 Page 22

HT-R791 specifications

The Onkyo HT-R791 is a highly regarded home theater receiver that seamlessly combines power, flexibility, and advanced technology to provide a captivating audio experience. This receiver is designed for both movie enthusiasts and music lovers, delivering high-quality sound and a variety of connectivity options to accommodate modern entertainment setups.

At the heart of the HT-R791 is its power amplification, featuring a 7.1 channel configuration that can deliver a robust 100 watts per channel. This allows for immersive surround sound that brings movies, music, and gaming to life, creating a dynamic audio environment. With multiple amplification circuits, the receiver ensures optimal performance and minimal distortion, resulting in crystal-clear sound reproduction.

The HT-R791 is equipped with various advanced surround sound technologies, including Dolby TrueHD and DTS-HD Master Audio. These formats are synonymous with high-definition audio and provide lossless sound quality, enhancing the detail and richness of every sound effect and musical note. Furthermore, the receiver supports Dolby Pro Logic IIz, which adds an extra dimension to sound by including height channels, enriching the overall spatial experience.

One of the standout features of the Onkyo HT-R791 is its extensive connectivity options. It boasts numerous HDMI inputs, enabling seamless integration with HD devices like Blu-ray players, gaming consoles, and streaming devices. With 4K video pass-through support, the receiver ensures compatibility with the latest display technologies, making it future-proof for homeowners looking to upgrade their visual setup.

Additionally, the HT-R791 includes legacy connections, such as composite and component video inputs, along with optical and coaxial audio inputs, allowing users to integrate older devices easily. The inclusion of a USB port further allows for playback of digital audio files directly from compatible devices.

For user convenience, the Onkyo HT-R791 features an easy-to-navigate on-screen display, making setup and operation straightforward even for novice users. Its user-friendly remote control provides quick access to essential controls, including listening modes and audio adjustments.

Overall, the Onkyo HT-R791 emerges as a versatile home theater receiver that blends power with intelligence, ensuring a rich audio-visual experience perfect for any home theater setup. Whether watching movies, enjoying music, or gaming, this receiver is designed to cater to diverse entertainment needs while maintaining exceptional sound quality and ease of use.
Top Page Image Contents