Dukane 403-570-01 user manual Tools Menu, Select Setup Tab, Utilities Tab

Dual Servo Spin Welder User’s Manual

TOOLS Menu

SELECT SETUP Tab

Pressing the Tools button displays the first tab labeled Select Setup. This contains eight buttons for selecting a setup file as shown in Figure 5–29. The Machine Cycle Count in the lower right corner is the total number of weld cycles that have occurred in the machine’s lifetime.

UTILITIES Tab

The middle tab named UTILITIES and shown in Figure 5–30 contains buttons for renaming, copying, and erasing setups, as well as a button for accessing a screen to record other machine settings and one for exporting the graph data for the last weld.

Rename Setup allows a name up to 26 characters. The keypad has the letters a through z and a caps key for A through Z, plus the numbers 0 through 9 and a space key. To rename a setup, enter a new name and then press the Rename button under the new name. Press the Done button when finished.

Copy Setup copies the values of the currently loaded setup file to the setup file specified. To copy a setup, press the Destination Setup ID button, enter the desired number, then press the Copy button. Press the Done button when finished.

Erase Setup clears all setup parameter values and restores them to factory defaults. To erase a setup, press the ERASE button, and then the DONE button.

The OTHER MACHINE SETTINGS button is used as a “notepad” feature in recording the information shown in Figure 5-31 and is provided as a convenience feature for restoring the complete machine setup. The Upper Tool Nr.. and Lower Tool Nr.. fields can be populated with tool identification numbers. The Column Position (mm)

Figure 5–29SELECT SETUP Screen in TOOLS Menu

Figure 5–30UTILITIES Screen in TOOLS Menu

Figure 5–31Record Other Machine Setetings Screen in UTILITIES Menu

Page  42 Dukane Manual Part No. 403-570-01