Dukane 403-570-01 user manual Touch Screen Display, 1Dual Servo Spin Welder Touch Screen Panel

Section 4 - Display and Controls

Touch Screen Display

The display is a 4.6 inch (12 cm) wide by 3.5 inch (9cm) tall color LCD screen shown in Figure 4-1. It contains an integrated touch screen with 192 touch–sensitive cells arranged as 16 rows of 12 columns.

Setup parameters and mode selections are programmed through the touch screen. A closeup view of the controls is shown in Figure 4–2. The left side of the display remains visible for most of the selected functions.

The icon in the upper left corner indicates machine status. Below that are three touch cells for Run mode (Run), Weld and Post–Weld Setup (Setup), and Setup Utilities (Tools). The functions of these buttons are covered in Chapter 5. The touch cell on the right labeled Part Data displays part data for the previously welded assemblies.

Touch

Screen

Display

Trigger

Indicator

Upper Tooling

Hub

Figure 4–1Dual Servo Spin Welder Touch Screen Panel

Figure 4–2Startup Screen

Dukane Manual Part No. 403-570-01 Page  23