Dukane 403-570-01 user manual Setting Time and Date On Touch Screen

Dual Servo Spin Welder User’s Manual

Setting Time and Date On Touch Screen

The time and date displayed on the touch screen are preset at the factory for US Central Standard Time. They can be changed using the following procedure:

1.Press the upper left-hand corner (marked by 1 in Figure 5-37) and lower left-hand corner (marked by 2) at the same time. The screen shown in Figure

5-38 should appear.

2.Press the “Clock” button. The screen shown in

Figure 5-39 should appear.

3.To change the date and time, first enter a numeric value. Then press the corresponding button associ- ated with that value. For example, to set the month to May, press 5 and then the “Mon” button.

4.After setting the time and date, press the “Exit” button on this screen and on the next screen.

5.Wait several seconds for the touch screen to return to normal operation before welding.

Figure 5-37Touch Screen - Time and Date 1

Figure 5-38Touch Screen - Time and Date 2

	Figure 5-39Touch Screen - Time and Date 3
Page  46	Dukane Manual Part No. 403-570-01