Section 10 - Maintenance
Touch Screen Display
Do not use any solvents or abrasive cleaners on the touch screen.Apply a small amount of computer cleaner to a soft towel first. Clean the panel with the moistened towel. Do not spray or apply a cleaner directly to the interface panel.
Remove grease by rubbing lightly with isopropyl alcohol. Afterward, provide a final cleaning using a
mild detergent and rinse with clean water.
Do not use any sharp objects on the display. It should not be touched unnecessarily. It is lit by a
AC Power Cord
The AC power cord should be kept in good condition and free from any cuts and abrasions. The AC plug should be straight with no bent prongs.
Maintenance
Visually inspect cables once a week, and replace or repair if necessary.
Lubricate the unpainted area on the front of the support column as needed with conventional grease.
CAUTION
Never use anything sharp on the touch screen. Only use your finger. The screen is intended for industrial use, but can be damaged by scratching or puncturing.
Dukane Manual Part No. | Page 83 |
