![](/images/new-backgrounds/1259121/25912147x1.webp)
Dual Servo Spin Welder User’s Manual
AC Power
The Dual Servo Spin Welder requires a 240 VAC 1– phase outlet rated at 20 Amps. All machine models use the same power cord and plug. The AC power cord is permanently attached to the welder. The other end of the cable has a 240 VAC,
Directly below the AC cord strain relief is the AC power switch. The switch combines the functions of a power switch and a 20 Amp circuit breaker. The breaker/switch
240 Voltlt AC Plugl
(NEMA(
240 Volt AC Socket
(NEMA
is identical on all models and is shown in Figure 3–6.
Figure | |
Plug | Receptacle |
AC Power Cord
AC Power Switch
Figure 3–6 AC Power Switch and Power Cord
Page 18 | Dukane Manual Part No. |