Features

70 WATTS MINIMUM of continuous RMS power to each of the five channels into 8Ω from 20 Hz to 20 kHz with no

more than 0.08 % THD (USA models, FTC rating)

100 WATTS MINIMUM of continuous RMS power to each of the five channels into 6Ω at 1 kHz (European

models, DIN)

130 WATTS MINIMUM to each of the five channels into 6Ω at 1 kHz (Asian models, EIAJ )

WRAT — WIDE RANGE AMPLIFIER TECHNOLOGY

DTS® *, DOLBY® ** DIGITAL AND DOLBY® PRO LOGIC DECODERS

5.1 CHANNEL EXTERNAL INPUTS

8 DSP LISTENING MODES

CINEMA Re-EQTM*** CIRCUITRY

STATE-OF-THE-ART 96 kHz/24-BIT D/A CONVERTER

4 ASSINGNABLE DIGITAL INPUT (2 coaxial and 2 opti- cal)

HEAVY-DUTY MULTIWAY SPEAKER BINDING POSTS FOR ALL CHANNELS; ALL DUAL BANANA- PLUG COMPATIBLE

3 AUDIO INPUTS AND 4 A/V INPUTS

4 S-VIDEO INPUTS, 2 S-VIDEO OUTPUTS

AUTO DIGITAL/ANALOG SIGNAL DETECTION & SWITCHING

“POWER ON” VOLUME FUNCTION

POWERFUL BACKLIT LEARNING REMOTE WITH MACRO FUNCTIONS

*Manufactured under license from Digital Theater Systems, Inc. US Pat. No.5,451,942 and other worldwide patents issues and pending. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc.© 1996 Digital Theater Systems, Inc. All rights reserved.

**Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.

***Re-Equalization and the “Re-EQ” logo are trademarks of Lucasfilm Ltd. Manufactured under license of Lucasfilm Ltd..

Supplied accessories

Check that the following accessories are supplied with this unit.

AM loop antenna 1

FM antenna 1

Remote controller (RC-392M) 1

Batteries (size AA or UM-3) 2

Available on the modelsAvailable for worldwide
other than U.S., Canadian,models.
and European models.

 

75/300 ohm antenna

Conversion plug 1

adapter 1

Use this plug if the power

 

 

cord plug of the TX-DS575X

 

does not fit your AC outlet.

 

(Shape may vary depending

 

on the area which it was

 

purchased.)

Memory Preservation

This unit does not require memory preservation batteries. A built-in memory power back-up system preserves the contents of the memory during power failures and even when the POWER switch is set to off. The POWER switch must be set to on in order to charge the back-up system.

The memory preservation period after the unit has been turned off varies depending on climate and placement of the unit. On the average, memory contents are protected over a period of a few weeks after the last time the unit has been turned off. This period is shorter when the unit is exposed to a very humid cli- mate.

4