Manuals / Brands / Home Audio / Stereo System / Onkyo / Home Audio / Stereo System

Onkyo TX-DS575x Connecting other devices, Decoder with 5.1 channel output

1 44

Download 44 pages, 2.66 Mb

Connecting other devices

•On each pair of input jacks, a red connector (marked R) corresponds to the right channel, and a white connector (marked L) to the left channel.

•A yellow connector (marked V) is used for video connection.

•Please refer to the instruction manual of each component when making any con- nections.

Audio connection cable	L
L (Left)	L
R (Right)	R

Video connection cable

V (Video)V

Monaural audio cable (mono)

Decoder with 5.1 channel output

You may connect the 5.1 channel outputs of an external decoder (such as MPEG decoder) to the MULTI CHANNEL INPUTs of this unit.

Use the DVD player or decoder controls to adjust the speaker settings for multi-channel input.

			DVD player or
	a decoder with Multi (5.1) channel outputs
AUDIO OUT								SUBWOOFER OUT


VIDEO OUT								CENTER OUT
VIDEO OUT								CENTER OUT
SURROUND OUT								FRONT OUT
SURROUND OUT								FRONT OUT

						DIGITAL INPUT
						COAXIAL 2	FRONT	SURROUND
	WARNING	AVIS					SPEAKERS B	SPEAKERS
	WARNING	AVIS
	RISK OF ELECTRIC SHOCK	RISQUE DE CHOC ELECTRIQUE
	DO NOT OPEN	NE PAS OUVRIR		L	L	COAXIAL 1
				L	L	COAXIAL 1
	R	L	V	S	FRONT		L	L
ANTENNA					FRONT		L	L
	DVD		IN		SPEAKERS
	DVD		IN		A	OPTICAL 2
					A	OPTICAL 2
AM				R	R
				R	R
	VIDEO 3		IN			OPTICAL 1	R	R
						OPTICAL 1

	VIDEO 2		IN
FM					CENTER			AC OUTLETS
FM					SPEAKER			AC OUTLETS
75			IN		SPEAKER	REMOTE CONTROL		AC 230V 50Hz SWITCHED
			IN					TOTAL 100W MAX.
								TOTAL 100W MAX.
	VIDEO 1
GND			OUT	FRONT
GND			OUT	R	L
				R	L
	(PLAY)		MONITOR	SURROUND
	IN	V	MONITOR	SURROUND
	IN	V	OUT	S	L
			OUT	R	L	AV RECEIVER
L	TAPE					MODEL NO. TX-DS575X
	OUT		SUBWOOFER		SUB
	OUT		PRE OUT	CENTER	SUB
	(REC)		PRE OUT	CENTER	WOOFER
R	(REC)
R
PHONO	R	L		MULTI CH INPUT
PHONO	CD

8

Contents

AV Receiver Instruction Manual Contents Important Safeguards Read Instructions Retain Instructions Heed Warnings Follow Instructions Precautions For British model For U.S. model For Canadian model Modele pour les Canadien Features Supplied accessories Before operating this unit Audio equipment connections Video equipment connections Connecting other devices AC outlet connection Connections for remote control () Connecting speakers Positioning speakers Connecting the power Turning the power on from the remote controller: Making antenna connections U.S. and Canadian Other models models Connecting the included antennas Connecting the FM indoor antenna: Speaker setup 4.Select the size of the center speaker Note: NONE: 5.Select the size of the surround speakers Setting the DISTANCE parameters Using the Test Tone function on the main unit Selecting a sound source Assigning the digital input Selecting the input signal format When Multi channel input is selected as a source 1.Press MODE AUDIO button on the remote controller Press MULTI CH button on the remote controller 3.Play the device connected to the MULTI CHANNEL INPUT jack 4.Adjust the volume level of each speaker Speakers selector (SPEAKERS A, B) SPEAKERS A: SPEAKERS B: Adjusting the tone (BASS, TREBLE) BASS: Using Listening Mode Listening Modes • A system with L/R front and center speakers DOLBY DIGITAL Surround DTS (Digital Theater System) Surround 3.Use these buttons to set the Listening mode parameters 2. LISTENING MODE buttons 1. Input selector buttons VOLUME knob VOL button (qup/udown) Main unit operation: 1.Press the CH LEVEL button 2.Press the PRESET/MODE ADJ Ã/¨ buttons to adjust the level 3.Press the ENTER/SCAN or ENTER button to select a speaker Setting the Listening mode parameters Tuning in a radio station Using preset radio stations Selecting a preset station 2.Enter the desired preset number using the PRESET/MODE ADJ Ã/¨ button Remote controller operation 3.Press the CH (– or +) button Cancelling preset stations Receiving RDS broadcasts (European models only) PTY Classiﬁcations in Europe PTY/TP DISPLAY ENTER/SCAN Searching for a station of your favorite program type (PTY scan) 1.Select FM as the input 6.Press the ENTER/SCAN button Recording a source Adding new sound to a video tape during video editing 2.Insert a blank video tape in the VCR connected to VIDEO 3.Press the VIDEO 2 or 3 button 4.Select the audio program source (TAPE, FM, AM, PHONO, CD) Using the remote controller MODE CD CD operation buttons Numeric keys Controlling an Onkyo CD player 1.Press the MODE CD button MODE MD MD operation buttons Controlling an Onkyo MD recorder 1.Press the MODE MD/AUX button Press the desired MD operation button Programming the remote controller codes of other devices into the RC-392M See page 39 for information on how to erase the learned codes from all buttons Erasing a learned code Erasing a code programmed in a button Press and hold down the corresponding MODE button and press the ENT button, then release the buttons Using a Macro function Macro Direct Learning function 2.Follow Steps 2 in the “Programming Macro Mode” on page 3.Press the MACRO DIRECT button to complete the proce- dure Check to see if the button has been programmed correctly 2.Press the MACRO MODE button again 2.Press the MACRO DIRECT button again Erasing all codes and operations programmed in the buttons 1.Open the battery cover and remove the batteries 3.Press the ENT button Troubleshooting guide Speciﬁcations AMPLIFIER SECTION VIDEO SECTION TUNER SECTION GENERAL Control positions and names Display 1.SEND/LEARN indicator [31] 2.ON/STNBY button [31] 3.SLEEP button [20] 4.MACRO DIRECT button [37] 5.MODE buttons [31~39] ONKYO U.S.A. CORPORATION ONKYO EUROPE ELECTRONICS GmbH ONKYO CHINA LIMITED