Onkyo TX-DS595 appendix Connections

Connections

Here is explanation of how to connect the main components to the TX-DS595 in the standard manner. There are many ways that any one component can be connected, and it is up to you to decide which method best fits your situation. The directions given here are only one option and should only be thought of as such. It is best to fully understand the nature of each connector and terminal as well as each of your components and their features to ascertain which method of connection is best.

•Be sure to always refer to the instructions that came with the component that you are connecting.

•Do not plug in the power cord until all connections have been made.

•For input jacks, red connectors (marked R) are used for the right channel, white connectors (marked L) are used for the left channel, and yellow connectors (marked V) are used for video connection.

•Do not bind audio/video connection cables with power cords and speaker cables. Doing so may adversely affect the picture and sound quality.

•When using the digital inputs, make sure to also connect the analog connections whenever possible.

	Connecting your video
Connecting antennas [17]	components [12]

•Insert all plugs and connectors securely. Improper connections can result in noise, poor performance, or damage to the equipment.

Improper connection

Inserted completely

•When using one of the optical input jacks, remove the protective cap and keep it safely. When the jack is not used, replace the protective cap.

•When using an optical input jack, always use an optical fiber cable.

Optical digital input terminal

An optical digital input terminal is equipped with a protection cap. When connecting, remove this cap. When not using, put the cap back on the terminal.

Connect to devices with

zterminals [13]

ANTENNA

AM

MONITOR	DVD		VIDEO 1
OUT	IN	OUT		IN

FM

75

REMOTE

CONTROL

PHONO CD OUT TAPE IN

						Cautions regarding the AC
Connecting speakers [15]						OUTLETS connectors [14]
				CENTER		SURROUND
	FRONT	A
	SPEAKERS		L	SPEAKER		SPEAKERS
R					R	L

VIDEO 2 VIDEO 3

IN IN

VIDEO

S VIDEO

FRONT

SPEAKERS B

L

R

FRONT SURR CENTER

	L
GND
	R	SUB
SUBWOOFER
	MULTI	WOOFER
PRE OUT	CHANNEL INPUT

L

			AV RECEIVER	R	L	AC OUTLETS
		R	MODEL NO. TX-DS595
				CAUTION:		AC 230-240V 50 Hz
						SWITCHED
				SEE INSTRUCTION MANUAL		TOTAL 100W MAX.
OPTICAL		COAXIAL
				FOR CORRECT SETTING.
1	2	1
				6 OHMS	4 OHMS
				MIN.	MIN.
				/ SPEAKER	/ SPEAKER
		2

SET BEFORE POWER ON

IMPEDANCE SELECTOR

DIGITAL INPUT

Connecting a	Connect to devices with
subwoofer [15]	multichannel output [14]
Connecting your audio
components [11]
		Default setting
		Input source	Digital input	Multichannel
		DVD	COAX 1	Yes
		VIDEO 1	COAX 2	No
		VIDEO 2	----	No
		VIDEO 3	OPT 2	No
		VIDEO 4	----	No
120V	Voltage	TAPE	----	No
SELECTOR
VOLTAGE
220-230V	selector [5]	FM
		AM
		PHONO	----	No
For worldwide models only		CD	OPT 1	No
		COAX: Coaxial	OPT: Optical	----: No setting	: Not applicable

10