Dynamic EQ

`Off

`On:

Audyssey Dynamic EQ® becomes active. The Dynamic EQ indicator will light.

With Audyssey Dynamic EQ, you can enjoy great sound even when listening at low volume levels.

Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. It does so by selecting the correct frequency response and surround volume levels moment-by-moment so that the content sounds the way it was created at any volume level — not just at reference level.

Reference Level

Audyssey Dynamic EQ Reference Level Offset

`0dB:

This should be selected for movie contents.

`5dB:

Select this setting for content that has a very wide dynamic range, such as classical music.

`10dB:

Select this setting for jazz or other music that has a wider dynamic range. This setting should also be selected for TV content as that is usually mixed at 10 dB below film reference.

`15dB:

Select this setting for pop/rock music or other program material that is mixed at very high listening levels and has a compressed dynamic range.

Movies are mixed in rooms calibrated for film reference. To achieve the same reference level in a home theater system each speaker level must be adjusted so that

–30 dBFS band-limited (500 Hz to 2000 Hz) pink noise produces 75 dB sound pressure level at the listening position. A home theater system automatically calibrated by Audyssey 2EQ will play at reference level when the master volume control is set to the 0 dB position. At that level you can hear the mix as the mixers heard it.

Audyssey Dynamic EQ is referenced to the standard film mix level. It makes adjustments to maintain the reference response and surround envelopment when the volume is turned down from 0 dB. However, film reference level is not always used in music or other non-film content.

Audyssey Dynamic EQ Reference Level Offset provides three offsets from the film level reference (5 dB, 10 dB, and 15 dB) that can be selected when the mix level of the content is not within the standard.

Note

If “Dynamic EQ” setting is set to “Off”, this technology cannot be used.

Dynamic Volume

`Off

`Light:

Activates Light Compression Mode

`Medium:

Activates Medium Compression Mode.

`Heavy:

Activates Heavy Compression Mode. This setting affects volume the most. It quiets the loud parts, such as explosions, and boosts the quiet parts so they can be heard.

Note

If you make Dynamic Volume active, “Dynamic EQ” is set to “On”. The Dynamic Vol indicator will light.

When “Dynamic EQ” is set to “Off”, “Dynamic Volume” is automatically switched to “Off”.

En-56

Advanced Operations

About Audyssey Dynamic EQ®

Audyssey Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Dynamic EQ selects the correct frequency response and surround levels moment-by-moment at any user-selected volume setting. The result is bass response, tonal balance, and surround impression that remain constant despite changes in volume. Dynamic EQ combines information from incoming source levels with actual output sound levels in the room, a prerequisite for delivering a loudness correction solution.

Audyssey Dynamic EQ works well by itself. However, if Audyssey 2EQ® is on, the two technologies work in tandem to provide well-balanced sound for every listener at any volume level.

About Audyssey Dynamic Volume®

Audyssey Dynamic Volume solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies. Dynamic Volume looks at the preferred volume setting by the user and then monitors how the volume of program material is being perceived by listeners in real time to decide whether an adjustment is needed.

Whenever necessary, Dynamic Volume makes the necessary rapid or gradual adjustments to maintain the desired playback volume level while optimizing the dynamic range. Audyssey Dynamic EQ is integrated into Dynamic Volume so that as the playback volume is adjusted automatically, the perceived bass response, tonal balance, surround impression and dialog clarity remain the same whether watching movies, flipping between television channels or changing from stereo to surround sound content.

Page 56
Image 56
Onkyo TX-NR515 instruction manual En-56, Reference Level

TX-NR515 specifications

The Onkyo TX-NR515 is a prominent feature-rich AV receiver that caters to home theater enthusiasts seeking quality audio performance and versatile connectivity options. Launched as part of Onkyo’s esteemed lineup, the TX-NR515 is designed to enhance the experience of multichannel audio for movies, music, and gaming.

One of the standout features of the TX-NR515 is its support for 7.2-channel surround sound, capable of delivering immersive audio experiences that draw listeners into their favorite media. With a power output of 95 watts per channel into 8 ohms, this receiver offers robust audio performance that can fill larger rooms without losing clarity or impact. The inclusion of Dolby TrueHD and DTS-HD Master Audio decoding allows for high-definition sound quality, making it an excellent choice for movie nights or music playback.

Equipped with multiple HDMI inputs, the TX-NR515 offers flexibility to connect a variety of devices, including Blu-ray players, gaming consoles, and streaming devices. It supports 4K video pass-through and upscaling, ensuring that content displayed on compatible televisions retains its quality. This feature allows users to enjoy high-resolution visuals alongside high-fidelity audio.

The receiver also embraces modern digital technology with features like built-in Wi-Fi and Bluetooth, enabling seamless wireless streaming from popular services like Spotify, Pandora, and more. Additionally, users can connect their smartphones or tablets directly to the receiver, making it easy to play their music collection without cumbersome wires.

Another feature enhancing the audio experience is Onkyo’s Multi-Zone capability, which allows users to enjoy audio in different rooms simultaneously. This includes support for Zone 2 outputs, giving users the flexibility to entertain guests or enjoy music in various spaces in their home.

The TX-NR515 further integrates Audyssey technologies, including Audyssey MultEQ, which ensures optimal room acoustics by calibrating speakers according to the specific characteristics of a room. This technology significantly improves audio clarity while balancing sound for different listening positions.

Combining advanced audio processing, extensive connectivity options, and user-friendly features, the Onkyo TX-NR515 stands out as an excellent choice for both casual listeners and audiophiles looking to elevate their home theater experience. With its robust performance, it continues to be a popular choice among users who value quality, innovation, and versatility in their audio-visual setup.