Onkyo TX-NR515 En-61, Miscellaneous, Hardware Setup, 4 “Setup”, Maximum Volume, Power On Volume

Miscellaneous

1 2 3 4 “Setup” 5

Main menu Miscellaneous

Volume Setup

■Maximum Volume

`Off, 30 to 79

With this setting, you can limit the maximum volume. To disable this setting, select “Off”.

■Power On Volume

`Last, Min, 1 to 79 or Max

With this setting, you can specify the volume setting to be used each time the AV receiver is turned on.

To use the same volume level that was used when the AV receiver was turned off, select “Last”.

The “Power On Volume” cannot be set higher than the “Maximum Volume” setting.

■Headphone Level

`–12dB to 0dB to +12dB

With this setting, you can specify the headphone volume relative to the main volume. This is useful if there’s a volume difference between your speakers and your headphones.

OSD Setup

■On Screen Display

`On

`Off

This preference determines whether operation details are displayed on-screen when an AV receiver function is adjusted.

Even when “On” is selected, operation details may not be output if the input source is connected to an HDMI IN.

■Language

(North American models)

`English, Deutsch, Français, Español, Italiano,

Nederlands, Svenska

(European, Australian, Asian and Taiwanese models)

`English, Deutsch, Français, Español, Italiano,

Nederlands, Svenska, 中文

This setting determines the language used for the on-screen menus.

■Screen Saver

`3 min, 5 min, 10 min

`Off

With this setting, you can set the time until the screen saver activates itself. Once active, the screen saver will go off and the screen will return to its previous state if the AV receiver is operated in any way.

Advanced Operations

Hardware Setup

1 2 3 4 “Setup” 5

Main Menu Hardware Setup

Tuner

■AM/FM Frequency Step (North American and Taiwanese models)

`10kHz/200kHz:

`9kHz/50kHz:

Select the frequency step according to your area.

■AM Frequency Step (European, Australian and Asian models)

`10kHz:

`9kHz:

Select the frequency step according to your area. For AM/FM tuning to work properly, you must specify the AM/FM frequency step used in your area.

Note

• When this setting is changed, all radio presets will be deleted.

En-61