Onkyo TX-NR515 En-55, Source Setup, TrueHD Loudness Management, Neo:6 Music Center Image

■TrueHD Loudness Management

`Off

`On

This setting specifies whether or not to apply the Late Night processing on a Dolby TrueHD source.

Note

•When this setting is set to “Off”, the Late Night function for Dolby TrueHD sources is automatically fixed to “Off”.

DTS

■Neo:6 Music

Center Image

`0 to 2 to 5

The DTS Neo:6 Music listening mode creates 6-channel surround sound from 2-channel stereo sources. With this setting, you can specify by how much the front left and right channel output is attenuated in order to create the center channel.

Changing the value from “0” to “5” will spread the sound of the center channel to left and right (outwards).

Theater-Dimensional

■Listening Angle

`Wide:

Select if the listening angle is 40 degrees.

`Narrow:

Select if the listening angle is 20 degrees. With this setting, you can optimize the Theater- Dimensional listening mode by specifying the angle of the front left and right speakers relative to the listening position. Ideally, the front left and right speakers should be equidistant from the listening position and at an angle close to one of the two available settings.

Front left speaker	Front right speaker
	20°/40°

Advanced Operations

Source Setup

1 2 3 4 “Setup” 5

Items can be set individually for each input selector.

Preparation

Press the input selector buttons to select an input source.

Main menu Source Setup

Audyssey

The tone for each speaker is set automatically by Audyssey 2EQ® Room Correction and Speaker Setup. To enable the following settings, you must first perform the Room Correction and Speaker Setup (➔ page 34).

•These technologies cannot be used when:

–a pair of headphones is connected, or

–either Pure Audio (European, Australian and Asian models) or Direct listening mode is selected.

■Audyssey

`Off

`Movie:

Select this setting for movie material.

The Audyssey indicator will light.

`Music:

Select this setting for music material.

The Audyssey indicator will light.

Note

•When “Audyssey Quick Start” has been used for measurement, “Audyssey” cannot be selected.

•Audyssey equalizing does not work with DSD sources.

En-55