1 | 2 3 | 4 | 5 | 6 | 7 | 1 23 | 4 | 5 | 6 | 7 |
(Taiwanese model)
8 9 | F | G H I |
Rear Panel
98
Display
1 Lights in the following conditions. "Z2": ZONE 2 output is on. / "HDMI": HDMI signals are input and
HDMI input selector is selected. / "ARC": Audio signals are input from ARC compatible TV and TV/CD input selector is selected. / "3D": Input signals are 3D. / "USB" (Ú): "USB" input is selected and USB storage device is connected. / "NET" (Ú): "NET" input is selected and the unit is connected to the network. / "DIGITAL": Digital signals are input and the digital input selector is selected. / Cursor indicators: NET or USB is controlled.
¼¼"USB" and "NET" will flash if the connection is not correct.
2 Lights when headphones are connected.
3 Lights when NET or USB is controlled.
4 Lights according to the type of input digital signals and the listening mode.
1 RI REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and synchronized with this unit.
2 FM ANTENNA jack (75 Ω) and AM ANTENNA terminal: The supplied antennas are connected.
3COMPONENT VIDEO IN and OUT jacks: Component video input/output jacks
4ETHERNET port: Used for LAN connection
5HDMI IN/OUT jacks: Digital video signals and audio signals are transmitted between the unit and the connected devices.
6SPEAKERS terminals: Speakers are connected. To use the Zone function, connect the speakers in the separate room to the ZONE2 speaker terminals.
7Power cord (North American, European, Australian and Asian models)
AC INLET (Taiwanese model): The power cord is connected.
8DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio signals are input.
9GND terminal: The ground wire of the turntable is connected.
F Composite video and analog audio jacks: Analog
video signals and audio signals are input.
G MONITOR OUT V jack: Video signals are output to the connected monitor or TV.
H ZONE 2 LINE OUT jacks: Analog audio signals are output to the connected amplifier to be used in ZONE 2.
I SUBWOOFER PRE OUT jacks: A subwoofer with built- in amplifier is connected.
5 Lights when Music Optimizer is enabled.
6Lights in the following conditions. "AUTO": Tuning mode
is auto. / "TUNED": Receiving AM/FM radio. flashes while tuning is automatically performed. / "FM
STEREO": Receiving FM stereo. / "RDS" (European,
Australian and Asian models): Receiving RDS broadcasting.
7"MUTING": Flashes when muting is on.
8Lights in the following conditions. "SLEEP": Sleep timer
has been set. / "ASb" (Auto Standby): Auto Standby
is on. / "ch": Channel is being set. / "Hz": Crossover
frequencies are being set. / "m/ft": Speaker distances
are being set. / "dB": Speaker volume is being set.
9Displays various information of the input signals. Pressing DISPLAY displays the type of input digital signals and the listening mode.
16
