■Power On Volume
`Last, Min, 1 to 99 or Max (Absolute display)
`Last,
To use the same volume level that was used when the AV receiver was turned off, select “Last”.
The “Power On Volume” setting cannot be set higher than the “Maximum Volume” setting.
■Headphone Level
`
With this setting, you can specify the headphone volume relative to the main volume. This is useful if there’s a volume difference between your speakers and your headphones.
OSD Setup
■On Screen Display
`On
`Off
This preference determines whether operation details are displayed
Even when “On” is selected, operation details may not be output if the input source is connected to an HDMI IN.
■Language
(North American models)
`English, Deutsch, Français, Español, Italiano,
Nederlands, Svenska
(European, Australian and Asian models)
`English, Deutsch, Français, Español, Italiano,
Nederlands, Svenska, 中文
This setting determines the language used for the
■Screen Saver
`3min, 5min, 10min
`Off
With this setting, you can set the time until the screen saver activates itself. Once active, the screen saver will go off and the screen will return to its previous state if the AV receiver is operated in any way.
Advanced Operations
Hardware Setup
1 2 3 4 “Setup” 5
Main Menu | Hardware Setup |
Tuner
■AM/FM Frequency Step (North American models)
`10kHz/200kHz:
`9kHz/50kHz:
Select the frequency step according to your area.
■AM Frequency Step (European, Australian and Asian models)
`10kHz:
`9kHz:
Select the frequency step according to your area. For AM/FM tuning to work properly, you must specify the AM/FM frequency step used in your area.
Note
• When this setting is changed, all radio presets will be deleted.