![Input Source](/images/new-backgrounds/21719/2171981x1.webp)
SP (speaker layout)
Listening mode buttons
Input Source
The following audio formats are supported by the listening modes.
AThis is mono (monophonic) sound.
SThis is stereo (stereophonic) sound. Two independent audio signal channels are reproduced through two speakers.
DThis is
FThis is
GThis is
HThis is Dolby Digital EX surround sound. This provides a center back surround channel from 5.1- channel sources.
Speaker Layout
The illustration shows which speakers are activated in each channel. See “Speaker Configuration” for the speaker setup (➔ page 60).
Z |
|
X |
|
C |
|
N*1 | B |
| b |
| V |
|
|
Turning On & Basic Operations
M*2 | J |
| K |
| L |
*1 | Press RECEIVER followed by SP (speaker layout) repeatedly |
| to select the speakers you want to use: front high, front wide, |
| or surround back. |
*2 | After enabling the corresponding speakers, press RECEIVER |
| followed by SP (speaker layout) repeatedly to select the layout |
you want to use. These layouts are only available when
“Preout to External Amplifier” (➔ page 59) is enabled.