SETTING UP THE PLAYER: ADVANCED
13
for your system. Your Front Right and Left speakers should measure the same distance. If
they do not, please adjust them if possible.
• Press the UP/DOWN ARROW buttons to select the first speaker to configure.
• Measure the distance (in inches) from that speaker to the listening position. If it is LESS than
the distance to the Front Left speaker, enter the difference (as close as possible) in inches
using the LEFT/RIGHT ARROW buttons. If it is GREATER than the distance to the Front Left
speaker, then leave the value at 0.
• Repeat for each speaker in the system (Center, Left Surround, Right Surround, and
Subwoofer) as available.
• Press the SELECT button to confirm the settings and return to the Speaker Setup Page.
Example Channel Delay Adjustment:
Supported Configuration Unsupported Configuration
Settings:
Center Speaker – 4 Inches
Subwoofer – 4 Inches
Left Surround – 12 Inches
Right Surround – 12 Inches
Settings:
Center Speaker – 0 Inch
Subwoofer – 0 Inch
Left Surround – 0 Inch
Right Surround – 0 Inch
• If the distance between the listener and the front speakers are 60 inches, and the distance
between the listener and the left surround speaker is 80 inches, the distance difference is 20
inches.
• This DVD player does not support delays for when the distance between the center or
surround speakers and the listener are shorter than that between the front speakers and the
listener.
• In case the channel delay settings cannot match your speaker configuration, please set all
distance difference to 0 inch and use your receiver/amplifier to set the channel delay (if
possible).