
S E T T I N G U P T H E P L A Y E R : B A S I C S
Use the Best Available Audio Connection
Connections for Most CD or DVD Playback
Rear Panel
GOOD
Analogue
Audio Cables
(Red/White)
BEST
Coaxial In
Audio In
Optical In
Connect ONE of these
AV Receiver/Integrated Amplifierdigital audio cables: Coaxial S/PDIF or Optical S/PDIF
If at all possible you will want to connect audio using digital cables (either coaxial S/PDIF or optical S/PDIF). If your receiver or integrated amplifier does not have Dolby Digital or DTS capability (for instance, an older Pro Logic model) then you should connect the “Mixed” stereo output of the OPPO DVD player to your receiver or integrated amplifier (and immediately start saving for an upgrade!) Setting up, you have the following choices:
•No Surround Speakers: If the audio system does not have surround speakers, please use the analogue
•Surround, But No Dolby Digital or DTS Support: If the audio system has surround speakers and Dolby Pro Logic Surround support, please use the analogue
•Surround Speakers and/or DTS and/or Dolby Digital Support: If your receiver supports Dolby Digital and/or DTS then please use a digital coaxial or optical cable and set the Audio Setup Page > SPDIF Output to “Raw”. No additional audio cables will be needed unless you listen to SACD (see below).
|
|
|
|
|
|
| EQ Type | None |
|
|
|
|
|
|
| Sound Field | Off |
|
|
|
|
|
|
| SPDIF Output | Raw |
|
|
|
|
|
|
| LPCM Rate | 48K |
|
|
|
|
|
|
| Audio Tone | 00 |
|
|
| Off | |||||
|
|
|
| Pro Logic II |
| |||
|
|
|
|
|
|
| Dolby Digital Setup | On |
|
|
|
|
|
|
| HDMI Audio |
Speaker Setup Page > Downmix* | Audio Setup Page > SPDIF Output* |
settings: Left/Right, Stereo, V.Surr, 5.1CH | settings: Raw, PCM |
*does not affect digital player outputs | *does not affect analogue player outputs |
Manufactured under license from Dolby Laboratories. “Dolby” and the
6