•After programming a sequence of tracks, repeatedly press PRO- GRAM to review the tracks you have already programmed.
•To edit the programmed sequence, repeatedly press PRO- GRAM until the desired memory location appears. Then press
SKIP or to find the track you want and press PROGRAM to store the new track.
6.Press PLAY/PAUSE. PROGRAM appears and the CD player plays the tracks in the order you programmed.
Notes:
•Press STOP to stop playing the sequence.
•Press STOP, PROGRAM, then PLAY to start playing the sequence again from the begin- ning.
•Use SKIP and to move
through the programmed sequence during play.
7.To clear the program memory, do any of the following:
•Press STOP, then open the CD compartment door.
•Press STOP, then set FUNCTION to a function other than CD.
•Press STOP, then POWER to turn off the system.
CD AND CD PLAYER CARE TIPS
Although a CD is very durable, you should handle it with care. We recom- mend the following precautions.
•Keep the CD in its protective case or sleeve when you are not playing it.
•Keep the CD dry. A drop of moisture can act as a lens and affect the laser beam’s focus. If it gets wet, wipe the CD with a soft, dry cloth before play- ing it.
•Do not write on either side of a CD, especially the
•Keep the CD clean. Handle the CD by its edge to avoid fingerprints and surface scratches, which can pre- vent the laser from accurately read- ing the CD. To clean the surface, use a CD Cleaner Kit (such as Cat. No.
•Do not store CDs in
If the
13