Whirlpool 8535840 Where local codes Do Not permit, Level and exhaust dryer, Check operation

Models: 8535840

1 24
Download 24 pages 24.09 Kb
Page 11
Image 11

DIRECT WIRE

OR POWER SUPPLY CORD

Where local codes Do Not permit

connecting cabinet-ground conductor to neutral wire:

Three-wire power supply cord must be four feet long and have three, No.-10 copper wires and match a three-wire receptacle of NEMA Type 10-30R.

Direct wire power supply cable must be prepared as shown in “Preparing the wire” of the three-wire connection direct-wire steps above.

4. Remove center terminal block screw.

6. Connect the other wires to outer terminal block screws. Tighten screws.

7. Tighten strain relief screws.

5. Remove the appliance ground wire (green with yellow stripes) from the external ground connector screw. Connect appliance ground wire and the neutral wire (white or center) of the power supply cord/cable under the center, silver-colored terminal block screw. Tighten screw.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

8. Insert tab of terminal block cover into slot of dryer rear panel. Secure cover with hold- down screw.

9. Connect a separate copper ground wire from the external ground connector screw to an adequate ground.

D. Level and exhaust dryer

Dryer must be level to reduce noise and assure proper performance.

Slide dryer onto cardboard or hardboard before moving across floor to prevent floor damage.

Move dryer close to its permanent location. Leave enough room to connect exhaust vent. Remove cardboard or hardboard from under dryer

Check levelness of dryer by placing a level on top of dryer, first side to side, then front to back. If dryer is not level, adjust dryer legs up or down.

If legs are not long enough to level dryer, order Extended Dryer Feet Kit, Part No. 279810 (sold two legs per kit), from your dealer.

4" clamp

4" clamp

Using a 4-inch clamp, connect exhaust vent to exhaust outlet in dryer. If connecting to existing exhaust vent, make sure the vent is clean.

The dryer exhaust vent must fit over the dryer exhaust outlet and inside the exhaust hood.

Make sure exhaust vent is secured to exhaust hood with a 4-inch clamp.

Move dryer into final position. Do not crush or kink exhaust vent. Make sure dryer is level.

F. Check operation

Check that you:

did not skip any steps.

installed all parts.

properly installed dryer legs.

leveled dryer.

have secured all exhaust vent joints with 4" clamps.

have all the tools you started with.

Plug power supply cord into grounded outlet or connect direct wire to power supply. Turn power supply on.

Read the Use and Care Guide to fully understand your new dryer. Select a full heat cycle (not the air cycle) and start dryer. After five minutes, open dryer door. You should feel heat inside dryer.

If dryer does not operate properly, check the following:

electrical supply is connected.

house fuse is intact and tight; or circuit breaker has not tripped.

dryer door is closed.

controls are set in a running or “On” position.

start button has been pushed firmly.

If dryer makes an unusual noise,

check that dryer is level.

11

Page 11
Image 11
Whirlpool 8535840 Where local codes Do Not permit, Level and exhaust dryer, Check operation, Clamp

8535840 specifications

The Whirlpool 8535840 is a versatile and highly efficient appliance designed to elevate the cooking experience in the modern kitchen. This product is primarily known for its functionality as a microwave oven, catering to the need for fast and convenient meal preparation. One of its standout features is its user-friendly interface, making it accessible for individuals of all cooking skill levels.

One of the main features of the Whirlpool 8535840 is the Sensor Cooking technology. This innovation allows the microwave to automatically adjust cooking time and power levels based on the moisture released from the food being cooked. As a result, it helps in achieving optimal cooking results without the need for constant monitoring, which is ideal for busy lifestyles. Whether reheating leftovers or cooking a meal from scratch, this feature ensures that food comes out perfectly cooked every time.

In addition to Sensor Cooking, this model also boasts a microwave popcorn setting, which takes the guesswork out of making popcorn. With just the press of a button, it can detect the proper cooking time needed for various types of popcorn, ensuring a perfect, fluffy snack. This level of convenience is a major selling point for many consumers.

The Whirlpool 8535840 is also designed with a spacious interior, allowing it to accommodate larger dishes and containers, which is a significant advantage over many compact models. This feature is particularly beneficial for families or individuals who like to meal prep.

Another characteristic worth noting is the sleek exterior design, which enhances the aesthetic appeal of any kitchen. Available in a variety of finishes, it can seamlessly blend with existing kitchen decor while providing the durability necessary for day-to-day use.

Furthermore, the appliance incorporates multiple power levels, offering versatility in cooking options. Users can choose from various settings depending on the type of food being prepared, whether they are defrosting meat or melting butter.

Energy efficiency is another key aspect of the Whirlpool 8535840. With an emphasis on reducing electricity consumption, this model is designed to be eco-friendly without compromising on performance.

Overall, the Whirlpool 8535840 is a top-tier microwave that combines innovative cooking technologies with practical features, making it a valuable addition to any kitchen.