Accessory Installation
The Model 3311 has several optional accessories that can be added to the unit in the field to meet your application’s needs. These accessories come with installation instructions.
•Spinner - Spinners are typically used in applications that add flavoring to a frozen neutral base product after it is dispensed.
Allows operator to serve a wider variety of frozen drinks from one machine (i.e. hazelnut added to cappuccino). See Figure E.
•Concealed Air Filter - Prevents dust from clogging the condenser. Ideal for applications near beaches. Helps maintain maximum air flow and optimum freezer performance. See Figure F.
NSF approved. Part # W0890200 stainless steel; W0890208 black.
•Exposed Air Filter - Similar to concealed air filter. Not NSF approved. Part # W0890206. See Figure G.
•Valve Lock Security Bracket - Part # W0471135. Ideal for
•Remote Fill Control - Automatically refill the mix storage hopper. Provide additional labor savings by
•Private Label Header - A private label or different drink header can be installed by removing two screws from the electrical box cover. Place the header (transparency) between the clear and opaque plates (plastic lens). Put these in place under the lip of the machine top. Slip the electrical box cover back on to the machine and reinsert the screws. (See Figure I) Grindmaster offers a variety of drink headers including: frozen beverage, frozen lemonade, cappuccino, margarita, pina colada, frozen cocktail, frozen daiquiri and smoothie.
OPERATION AND ADJUSTMENTS
How to Operate
1.Sanitize unit following the cleaning instructions starting on page 10.
2.Fill the mix storage hopper following the instructions on page 10. Allow barrel to fill with product to proper level, then insert carb tube from parts bag in hole toward rear of hopper. See Figure J.
3.Turn power switch to “ON” position.
4.Allow product to freeze in barrel. Compressor will turn off when product reaches
5.To dispense product pull down valve handle and release when done.
6.If product consistency is not as desired, adjust per the instructions on page 7.
7.Refill mix storage hopper when “mix out” light is ON.
8.Clean the unit regularly following local health codes.
9.Perform maintenance when necessary to increase the life of the unit. See chart in this manual for regular maintenance schedule.
Mix Low Function
1.This model utilizes a simple float mechanism to sense when mix is low in hopper. (See Figure J) When the mix level in the hopper is low, the mix low light located in the front of the machine next to the valve block will illuminate.
NOTE: Do not run the unit under mix low conditions for long periods of time. This can affect machine performance or damage componentry.
Page 6
Spinner mounting bracket
Spinner
Figure E
FILTER
SLIDE THE FILTER IN BEHIND
Figure F THE FILTER PANEL, & IN FRONT OF THE EXISTING SIDE PANEL.
TO CHANGE, REMOVE, CLEAN AND/OR REPLACE.
Figure G
Figure H
Figure I
Model 3311
