Subaru Robin Power Products RGX3510 manual 2700 - 2800 r.p.m

11-5 IDLE CONTROL (Option for 60Hz only)

11-5-1ENGINE- SPEEDIS NOT INCREASED WHEN A LOADIS APPLIED

(1)Inspect the solenoid bracket.

Checkthebendangle of solenoidbracket. If thebracketisdistorted,correcttheangle with proper tool.

i

'

1I

SOLENOID !

		SOLENOIDBRACKET	RGX5510
			Fig. 11-12
(2) Checkthewattage	ofgeneratortheloadappied .		. .

If the generator is loaded over the rated wattage, the engine speed can not be increased.

Most induction loads such .as electric motor or electric tools or welding machine require three to five times large wattage of their ratings at starting.

This starting wattage mustnot exceed the rated output of the generator.

(3) Check the slow set r.p.m.

Thenormalidlingspeedby theIDLE CONTROL is as follows :

RGX2410, 3510 * . * * - * 3150 - 3200 r.p.m.
RGX5j10	..............2700 - 2800 r.p.m.
Adjusttheidlingspeedmonitoringthevolt-

meter so that it indicatesbetween 75 voltand 85 volt.

Turntheadjustingscrewtoadjusttheslow speed.

- 71 -