Subaru Robin Power Products RGX3510 manual 4Connecttherubberpipe

10-3-7FUEL TANK

1)Connect the rubber pipe to the engine carburetor and fasten it with a hose clamp. Attach the banjo to theopposite end of therubberpipe,tighten it witha hose clamp,andfastenthepipetothefuel strainer with the banjo bolt.

2)Fasten the strainer to the strainer bracket with the joint nuts.

3)Mount the fuel tank on the side plates with rubber (fuel tank) between them.

NOTE :For easy tank assembly,glue therubber (fuel tank) over the holes on the side plates.

4)Connecttherubberpipe

First, fit the hose clamps on the rubber pipe, connect the strainer and fuel tank,then fasten the rubber pipe with thehose clamps.

NOTE : Apply a drop of oil to the rubber pipe so that it may easily be connected to the strainer and the fuel tank.

FUEL GAUGE

.FUEL TANK

RUBBER PIPE

GASKET

Fig. 10-29

- 64 -