Subaru Robin Power Products RGX3510 manual 3.9- 5.9 Nom 2.9-4.3 ft4b

Install the engine and alternator assembly into the frame.

Put the engine and alternator assembly into the frame from the side of it. Tightenthenutsoverthemountrubberbolts

to fix.

Tightening torque

1 1.8- 13.7 Nom

:.120- 140 kg*cm .i

’, 8.7 - 10.1 ft*lb ;

Fig. 10-24

NOTE : When tightening the nuts, slightly lift the engine and alternator assembly so that the weight is not applied to the mount rubbers.

( 3 ) Attach the side plate frame.

M 6 x 10 mm bolt ..............2 pcs.

Attach fuel tank mount rubbers to side plates. The.nuts for mount rubbers are welded to side plates.

3.9- 5.9 Nom

.... 2.9-4.3 ft4b :

Fig. 10-25

10-3-6 CONTROL BOX

Mount the control box assembly to the frame.

Refer to Section 10-5for disassembly, checking and reassembly proceduresof the control box.

(2)Connect the wires drawn out from the statorto the wires from the controlbox. Connect the oil sensor u-ires at the same time.

NOTE :Connect thewires of the same color.

- 62 -