Panasonic BL-C30 operating instructions When you set FTP for Transfer Method

Operating Instructions

When you set [FTP] for Transfer Method

Select [FTP], and click [Next>]. The following page is displayed.

•Clicking [<Back] takes you back to the previous page.

•Clicking [Cancel] takes you back to the Image Buffer/Transfer page without saving changes.

Setting		Description
Server IP	•	If you set the server IP address, set 4 digits (0—255) and 3
Address or		periods such as "192.168.0.253". But "0.0.0.0" and
Host Name*1		"255.255.255.255" are not available. Or set a host name (1—
		255 characters).
Port No.	•	Enter the number (1—65535). Usually set to 21.
Login ID*2	•	If your ISP requires a login ID, set it (0—63 characters).
Password*2	•	If your ISP requires a password, set it (0—63 characters).
Login Timing	•	Select the login timing to an FTP server. If you set [One Time]
		during 1-minute transfer, the camera logs in to the server only
		once, and can reduce the time to log in or log out.
Upload File	•	Set the file name to save on an FTP server. Enter 1—234
Name*1		characters. Entering "\" creates directories for a file. (E.g.
		NetworkCamera\image.jpg)
Overwrite	•	Selecting [Overwrite File] saves and overwrites the image on
setting		the server. Selecting [Save as New File with Time Stamp]
		saves the image attaching time stamps on the file name, and
		the images are not overwritten.
		(E.g. image20050101093020500.jpg) Underlined numbers
		are "9h30min20s500ms on January 1, 2005". The letter "s" is
		inserted after the day when referring to a summer time zone.
Data Transfer	•	Select [Passive Mode] normally. If FTP does not work, select
Method		[Active Mode] and check the operation.

64