Operating Instructions

3.1.7Resetting the Camera to Factory Default

All camera settings are reset to factory default directly after the Execute button is clicked. To restore the wireless connection, access the camera by using the wired connection and set up the wireless configuration. (See Getting Started.)

1.Click [Reset to Factory Default] on the Maintenance page.

2.Click [Execute].

The indicator blinks orange, and then turns off for 10 seconds.

All camera settings (user name, password, IP address, subnet mask etc.) are reset to factory default.

If the camera is reset to factory default, the network connection mode changes to [Automatic Setup]. Reconfigure the camera seeing Installation/Troubleshooting.

Notes

The internal clock will not be reset, but the time format will return to AM/ PM mode (see page 43). Set it again.

• See page 94—page 101 for default settings.

Pressing the FACTORY DEFAULT RESETbutton resets the camera to the factory default (see page 93).

All buffered images are deleted when resetting the camera to factory default.

The reset operation takes about 1 minute.

Do not turn off the camera during the reset operation.

90

Page 90
Image 90
Panasonic BL-C30 operating instructions Resetting the Camera to Factory Default