Operating Instructions

5.Click [Restart].

The camera restarts, and the Top page is displayed.

If the camera is restarted, all buffered images on the internal memory are deleted.

Checking [Yes] for [Allow Access from the Internet] on [Automatic Setup] may not display the Top page, because the port number may change. Use the Setup Program to access the camera.

Note

When you do not know the camera IP address while setting [Automatic Setup] or [DHCP Setup], you can search the camera IP address by using the Setup Program (see page 104).

Setting

Description

 

 

Allow Access from

• Allow Access from the Internet setting automatically

the Internet

configures the router's Port Forwarding setting (some

(Automatic Setup

routers call it "Address Translation", "Static IP

Only)

Masquerade", "Virtual Server" or "Port Mapping"). To

 

enable Internet access to the camera, check [Yes]. In this

 

case, the camera automatically searches the unused port

 

number on your network in the order of 80 and from 50000

 

to 50050. To disable Internet access to the camera, check

 

[No].

 

 

Network

• If you prohibit the Setup Program from changing the

Configuration from

network settings, clear the check box.

Setup Program

 

(Static/DHCP Only)

 

 

 

Port Number

• You can set the camera port number (80 by default). When

(Static/DHCP Only)

you use multiple cameras with a router on your network,

 

each camera must be assigned its own port number (see

 

page 13 "1.5 Connecting the Camera to a Router Not

 

Supporting UPnP™ " in the Installation/Troubleshooting).

 

• Do not set the following port numbers.

 

E.g., FTP: 20 and 21, Telnet: 23, SMTP: 25, DNS: 53,

 

POP3: 110, HTTPS:443, ICQ: 4000 and IRC: 6661—6667.

 

• Enter only the number (1—65535).

 

• Some ISPs do not allow you to use port 80. Ask your ISP

 

or network administrator about the accessible port number

 

over the Internet.

 

 

33

Page 33
Image 33
Panasonic BL-C30 operating instructions Setting Description