Operating Instructions
4.Display images clicking buttons below.
Date and time of the day when the images were buffered are displayed.
Date, time and frame number are displayed.
[Play]:
The buffered images are displayed continuously.
[<Prev] or [Next>]:
The previous or next image is displayed.
[<10] or [10>]:
The 10th image before or after the current image is displayed.
[<100] or [100>]:
The 100th image before or after the current image is displayed.
Notes
•Date, Time and frame number are not displayed in play mode.
•Maximum number of buffered images change depending on resolution, image quality and what object the camera buffers. At the 320 x 240 pixels resolution and the standard quality, the camera buffers about 250 frames (see page 112). (If 3 trigger settings are enabled, the internal memory capacity is divided into 3 sections. In this case, each trigger can buffer about 80 frames.)
1.4.1Deleting Buffered Images
If you intend to delete images for each transfer condition, click [Delete Buffered Images] on the Image Buffer/Transfer page (see page 60 or page 68).
Notes
•When you change settings (except for Enable/Disable settings) on the Image Buffer/Transfer page, the buffered images only for that trigger will be deleted.
•The following operations also delete all buffered images.
•Turning off the camera.
•Saving the Date and Time page.
•Restarting, updating firmware or resetting the camera to factory default.
•Changing the Enable/Disable settings of Image Buffer/Transfer (see page 60 or page 68).
25
