They usually have two addresses | Panasonic BL-C30 guide

Operating Instructions

	Setting	Description

•	IP address	• If your ISP or network administrator specifies the IP
•	Subnet Mask	address and subnet mask, enter them in each data field.
(Static Only)		• If you use the camera on the LAN, set the IP address in the
		same subnet mask as your PC (see page 103).
		• Set 4 digits (0—255) and 3 periods such as
		"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
		not available.

Host Name		• If your ISP uses the DHCP function which automatically
(DHCP Only)		assigns the IP address to the camera, enter the ISP-
		assigned host name. (Host name may be used as an
		authentication.)
		• Enter ASCII characters for the host name (see page 111).
		But [Space], ["], ['], [&], [<] and [>] are not available.

Default Gateway*1		• If you have the assigned Default Gateway address by your
(Static/DHCP Only)		ISP or network administrator, enter it in this data field.
		• Set 4 digits (0—255) and 3 periods such as
		"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
		not available.

DNS Server		• DNS server address is required in the following conditions.
Address*1		• Transferring camera images by E-mail or FTP
(Static/DHCP Only)		• Setting cameras by their host names on the Multi-
		Camera Setup page
		• Using the Viewnetcam.com service
		• If you have the assigned DNS server addresses by your
		ISP or network administrator, enter them in this data field.
		They usually have two addresses.
		• Set 4 digits (0—255) and 3 periods such as
		"192.168.0.253". But "0.0.0.0" and "255.255.255.255" are
		not available.

34

Image 34

Panasonic BL-C30 operating instructions They usually have two addresses, Set 4 digits 0-255 and 3 periods such as

Contents

Operating Instructions Network Camera Monitoring Off Privacy Monitoring Purpose Privacy modeProtecting privacy Remote monitoring Easy installation using UPnPTM Universal Plug and Play System DescriptionOperating Protocol Important Safety Instructions Table of Contents Camera Maintenance Index Accessing the Camera Start up the web browser on your PC Click the following tabs to display each C D E F See Viewing Single CameraCapture Image Click to Center Button Operation Bar Camera Image Security Warning window Security Warning window on Microsoft Windows XP Service Pack Banner Image Auto Centering Click to Center Capturing a Still Image Using Operation Bar Pan/Tilt Operation Pan/Tilt Range Setting Home Position/Sensor Position/Preset Button Registering Home Position/Sensor Position Registering a Preset Button Only an administrator can register preset buttons Viewing the Image Changing or Deleting the Settings Viewing Multi-Camera Capture Image Button See Still image can be saved using the capture image button see When the image is not displayed on the Multi-CameraHow to save a still image to your PC On the Single Camera or Multi-Camera Viewing Buffered Image Prev or Next Deleting Buffered ImagesPlay 10 or Viewing Still Images on Your Mobile Phone Stopping E-mail Transfer by the Mobile Phone Operation Using Camera Features Access the camera see Top page is displayed Basic Network WirelessAccount Administrator*1 UPnP Privacy Mode Enables privacy mode see IndicatorControl Connecting the Camera to Your Network Automatic Setup Dhcp Setup Static Setup Setting Description They usually have two addresses 160 x 120 pixels About 3 KB 24 Kbit Not displayed. in the Installation/TroubleshootingOn the image quality or how bright the object is 320 x 240 pixels About 10 KB 80 Kbit Using Wireless LAN Set each parameter for the Encryption Selecting WEP at Cipher enables you to set WEPKey1One or all of the four keys can be set. Check the same Bottom Operating Instructions Access from the Internet on the Network page see Using UPnP Universal Plug and PlayIf the network setting is Automatic Setup, enable Allow Internet Setting Description Confirming the Internet access Setting Date and Time Cameras time setting from fraudulent NTP server Check the box to enable itTime setting from the NTP server moves forward or Name by E-mail or FTP transfer uses only 24 h format Changing Camera Settings Maximum Position and preset buttonsHome Position *2 Values must be selected as minimum home position maximum Setting Description Specifying Pan/Tilt Range Operating Instructions Users must enter the user name and password Password Number of Users Accessible Pages Administrator/General Users/Guest UsersItems Administrator General Users Guest Users Access Level Logging in to the Camera Access from guest users From guest users Creating, Modifying or Deleting General Users Setting Description Operating Instructions Camera and Buffered Image pages. If you select Or Japanese. The selected language is displayed asInitial language on the Top, Single Camera, Multi Support pages are displayed only in English Operating Instructions Configuring Multiple Cameras Setting Description Buffering or Transferring Images by Timer Option and set the time period Setting Description Camera transfers the image to an FTP server see Mail Camera transfers the image by E-mail see When you set FTP for Transfer Method When you set E-mail for Transfer Method Character and 0-22 characters for a 2-byte character Time in 24h mode is attached on the subjectIs inserted after the day when referring to a summer time Zone Operating Instructions Buffering or Transferring Images by Sensor Option and set the time period Setting Description Quality or what object you view Many E-mails to a mobile phone FTP When you set FTP for Transfer Method When you set E-mail for Transfer Method Inserted after the day when referring to a summer time Time in 24h mode is attached on the subject. E.gSubject 20050101093020500 Underlined numbers are Seconds Minute 1st 2nd 3rd 4th 5th 6th Specifying Operation Time About Operation Time Operation Time Changing Indicator Display Privacy Button Enabling Privacy ModePrivacy Mode Front of the camera Wireless Status Displays wireless information see MaintenanceMaintenance Status Default Confirming the Wireless Status Confirming the Status Restarting the Camera Updating the Camera Firmware Operating Instructions Confirm that the version number on the Top page is updated Creating Configuration File Loading Settings from a Configuration File Resetting the Camera to Factory Default Seeing Help Wireless Help Displays the Wireless Help page seeSupport Support Help Seeing Product Information Seeing Wireless HelpSeeing Support Information Factory Default Reset Button Camera has a Factory Default Reset button on the bottom Items Default Required Default Setting ListBasic My Network Places Viewnet Enable Wireless Communication modeSpeed Auto Encryption WEP Authentication Cam.com Date Time Setting Home Position Camera Camera Name50-+50 degrees Tilt Range Minimum Security General Administrator AuthenticationAccount Retype Advanced IP address*1 Multi Multi-Camera Blank DisplayIP Address or Host Blank Name Buffer Status Off Transfer Trigger Image ResolutionMode Privacy Mode Active Time of Trigger Always Lens Position When Buttons Preset Preset ButtonsPreset 101 Cleaning the Lens CleaningCleaning the Main Unit Clean the camera after the camera is turned off Steps Setting an IP Address on Your PCLocal IP Address Class Subnet Mask Local IP Address Using Setup Program Finding the camera Automatic Setup Local or Internet Access or Manual Setup Manual Setup window Setting the Proxy Server Settings on Web Browser Setting Your PCHow to Set the Proxy Server Settings Operating Instructions Operating Instructions Windows Setup tab Select Communication Detail Setting the Internet Temporary File Setting on Web BrowserWindows XP Start Settings Add or Remove Ascii Character Table 111 File Size and Number of Buffered Images Other Specifications Items Network Camera Items Specifications113 Wireless Specifications Items Ofdm Index 115 System Requirements for your PC ActiveX Controls116 Update Firmware UPnP Web Browser Wireless Wireless Help 117 Copyright