13
To enhance the bass sound,
briefly press MEMORY/E-BASS.
BASS appears. To return to nor-
mal sound, press MEMORY/E-
BASS
again.
BASS disappears.
5. When the last track finishes play-
ing, the display alternately shows
the total number of tracks and to-
tal playing time of the CD for
about 2 minutes, then the CD
player automatically turns off. To
stop play and turn off the CD
player sooner, press STOP/CLEAR
twice.
Notes:
E-Bass turns off when the CD
player is turned off.
If you press STOP during play,
the CD player exits INTRO,
RANDOM, and REPEAT play.
6. To remove the CD, press to
open the disc compartment. Be
sure the CD has stopped spin-
ning, then press the tab in the
center of the disc compartment’s
center hub and lift the CD. Then
close the compartment cover.
DIGITAL ANTI-SHOCK SYSTEM (DAS2) (CD-3640 ONLY)
Your CD-3640 contains special cir-
cuits to overcome sound skipping
problems caused by shock or vibra-
tion. This means you can carry the CD
player anywhere you go or use it in
your vehicle. When you turn on the
anti-shock system, the CD player con-
tinuously saves the next few seconds
of music in memory. During a shock or
vibration that would normally make a
track skip or pause, the CD player
plays directly from memory.
To turn on the anti-shock system, set
DAS on the left side of the CD player
to IN. If the CD player is playing a CD,
the sound briefly stops and DAS ap-
pears.
To turn off the anti-shock system, set
DAS to OUT. The sound briefly stops
and
DAS disappears.
42-5073.fm Page 13 Thursday, August 12, 1999 11:08 AM