Optimus STAV-3590 Installing the Remote Control’s Batteries, Cautions, Preparing Your Receiver

Preparing Your Receiver

Using One Remote Control for More than One Unit

Note: When you plug the cable into a component’s CONTROL IN jack, that component’s remote sensor does not function.

	CONTROL
IN	IN
OUT	OUT
CONTROL

If you also have an Optimus professional series CD player, VCR, or cassette deck with the OSR mark, you can connect its CONTROL IN jack to the receiver so you can control all of your equipment with a single remote control. You can also use the other component’s remote control by pointing it at the receiver’s front panel.

1.Connect each component to the receiver as shown in “Connecting Pro- gram Sources” on Page 8.

Note: You must connect the audio cables between the receiver and the other audio accessory to use your receiver’s remote control to control the accessory.

Receiver

Remote

Control

2. Connect the cable supplied with the CD player, VCR, or cassette deck between the receiver’s CONTROL OUT jack and the other component’s CONTROL IN jack.

Other Component	3. When you want to control more than one other component using the
with OSR Mark
	receiver’s remote control, daisy-chain the CONTROL OUT and CONTROL
To the CONTROL IN ja
	IN connections as shown.
of Another Componen

Having the OSR Mark

Installing the

Remote Control’s Batteries

Cautions:

•Use only fresh batteries of the recom- mended size and type.

•Always remove old or weak batteries. Batteries can leak chemicals that can damage electronic circuits.

The remote control uses two AAA batteries (not included). For the longest bat- tery life, we recommend RadioShack’s alkaline batteries (Cat. No. 23-555).

1.Press and open the battery compartment cover.

2.Place two fresh AAA batteries in the compartment as indicated by the polarity symbols (+ and –) marked in the compartment.

Note: If the TRANSMIT/LEARN indicator does not light when you press a button, replace the batteries immediately. When you remove the remote control’s batter- ies, the memory contents are protected for about 15 minutes. Be sure to install new batteries within 15 minutes after you remove the old batteries.

3.Replace the battery compartment cover.

4.Press RESET.

12