Optimus STAV-3590 Preparing Your Receiver, Connecting Speakers, Preparing the Speaker Wires, Left

Preparing Your Receiver

Connecting Speakers Preparing the Speaker Wires

Follow these guidelines when you select and connect speakers.

•Be sure you properly connect all speakers.

•Do not connect two pairs of speakers to a single set of terminals (A or B) at the same time. When you use two pairs of speakers, connect one set to

Speakers A and one set to Speakers B.

•Realistic, Optimus, and other high- quality speakers have color-coded speaker terminals (red for positive polarity and black for negative polar- ity). Use these color-coded terminals as a guide to help you properly con- nect the speakers to the receiver.

•Use 16-gauge (or larger) speaker wire for all speaker connections, and con- sider possible speaker locations before you decide how much speaker wire you need.

Speaker wire consists of two conductors (individual wires) encased in insulation and is usually color-coded or marked with a ridge along one side so you can identify each conductor. Use these markings as a guide to help you properly connect the speakers to your receiver.

Follow these steps to prepare the speaker wires.

Wire Strand

Conductor

Wire Strands

Conductor

1.Cut the speaker wires to the necessary length.

2.Separate the wires about 4 inches on each end.

3.Using a wire stripper, carefully strip about 3/4 inch of insulation from the end of each conductor.

4.Twist the end of each conductor to secure any loose wire strands.

Surround Left

Speakers

R	R	L
T		A
		B
T
CENTER		REAR
R SPEAKER	SPEAKERS

R	L
R	L

FRONT SPEAKERS

A

B

Center Speaker
Front B Speakers	Left
Front A Speakers		Left

6