Optiview 4CHs user manual 10、DVR PC Viewer User Guide, Installation

4CH STANDALONE DVR

10、DVR PC Viewer User Guide

Introduction

This document is the Operation Manual for the 4 CH Stand Alone DVR PCViewer.

The application will show you stream image stored in the Storage Device (HDD, CF card, USB Memory Stick, etc.), which was previously formatted and recorded by the DVR.

If any DVR-formatted Storage Device is connected to your PC, the application will automatically detect the Storage Device and show the recorded stream. You can also save the current screen to a JPEG file, and save the video/audio stream to a file [MYS file, the Vineyard's proprietary video/audio stream file format.

The application consists of two functional modules:

DVR PC Viewer Shows stream stored in the DVR Storage Device.

MYS File Player Plays captured stream file.

Terms in This Document

Storage Device	Hard Disk, CF Card, USB Memory Stick
The Application	DVR Storage Device PC Viewer
DVR Storage Device Storage Device which was previously formatted and recorded by the
DVR base on Vineyard Technologies' DVR chip.
OS	Operating System
CPU	Central Processing Unit
RAM	Random Access Memory
GUI	Graphic User Interface

Requirement

OS	OS of your PC should be Windows 2000(SP4) / XP(SP2) or later.
DirectX	Your PC should be equipped with DirectX 7.0 or later.

Recommendation

Operating System (OS)	The application runs only on Windows 2000 (SP4) / XP (SP2) or later
CPU	1.0 GHz or Higher.
RAM	256 MByte or greater.

Installation

A. Hardware Installation

Before executing the application, connect the DVR Storage Device to the IDE cable of your PC directly, or via USB adaptor

B. Software Installation

Run Setup.exe in the CD-ROM and follow the instruction to finish the installation. [Make sure that the OS of your PC is Windows 2000 SP4/Windows XP SP2 or later.

-11-