4CH STANDALONE DVR
Execution
Just double click the icon of PC Viewer. The application will try to detect physical storage devices
installed at your PC and search for DVR storage device(s) among them.
If there is DVR Storage Device, the application will automatically start playing. However, If the
application fails to detect DVR Storage Device, which means that there is no DVR Storage
Device installed to your system, it will show following error message and set the default working
mode to MYS Player (See Section. 4).
OK
Fig.1. No DVR Storage Device Message
Shortcut to play the video files on your PC via the attached USB cable:
a. Connect USB cable both ends to the USB port of the DVR and your PC.
b. Supply 12VDC power to the DVR.
c. Wait until the message of USB detected pops up on the VGA monitor.
d. Run the PC Viewer software accordingly.
e. Wait until the very first image comes up to the PC Viewer.
f.Click “Play” icon on the control panel of the PC Viewer to start viewing the video files.
DVR PC Viewer
A. User Interface
The default page of the application is DVR Storage Device PC Viewer. The user interface is shown in Fig.2.
