4CH STANDALONE DVR
11、SATA TO PATA CONVERT BOARD
(Option)
Foreword
This is a SATA convert PATA interface PCB board, before using the product, please read this manual carefully for further recognizing for the product!
I. Key Feature
Convert SATA TO PATA interface
Transfer rate max up to 66/100/133MB/sec
No SATA HDD capacity limited
LED indicators for Power(green) & HDD(red)
Compact JBOD ( Big ) special function.
II. Hardware and Install
Power LED | 40pin PATA connector |
|
4pin power connector
HDD LED
Jumper select
Device 0=Master (Jumper off)
Device 1=Slave (Jumper on)
22pin SATA connector
SATA HDD
80pin PATA cable
4pin power cable
III.Jumper setting for Master & Slave
1.One PATA cable with one SATA HDD then Jumper setting in Master ( Jumper off )
2. One PATA cable with two SATA HDD then Jumper setting in one is Master ( Jumper off ); and another is Slave ( Jumper on ).
3. Using JBOD ( Big ) special function.
a.) One PATA cable with two SATA HDD then Jumper setting same as step 2.
b.) Two PATA cable, each cable with one SATA HDD then these two Jumpers always setting in Master
( Jumper off )
Master SATA HDD
| To Master SATA HDD |
| Jumper off |
4pin power cable | Slave SATA HDD |
| |
| To Slave SATA HDD |
| Jumper on |
4pin power cable
