4CH STANDALONE DVR
RECORD SCHEDULE
RECORD SCHEDULE
TTTTTTTTTTTTTTTTTTTTTTTT
: : : : : : : :
03 6 9 12 15 18 21
Press 
to select items, use 
to enter.
Press 
to exit
(1)Range:
(2)Set ”T” for continuous recording.
(3)Set “M” for motion recording.
(4)Set up
MOTION SETUP
MOTION SETUP MENU |
|
|
| |||
SENSITIVITY | 0 | (OFF) |
| |||
SENSITIVITY | 0 | (OFF) |
| |||
SENSITIVITY | 3 | . |
| |||
SENSITIVITY | 5 | . |
| |||
( ): SELECT | ( | ):SET | ( | ):EXIT |
| |
|
|
|
| |||
Press | to select items, use | to enter. | ||||
Press | to exit |
|
|
|
| |
★If you want to enable Motion Recording, Please finish the setup procedure a. and b.
a.Set SENSITIVITY in the menu option
“MOTION SETUP MENU"
b.Set “PROGRAMMED RECORD”
6、VIEW CONTROL
(1)You can use the following view control buttons to monitor the video from the cameras.
Camera #1 (Ch1), return to Quad Mode by press again.
Camera #2 (Ch2),return to Quad Mode by press again.
Camera #3 (Ch3),return to Quad Mode by press again.
Camera #4 (Ch4),return to Quad Mode by press again.
(2)View Control is only valid while the RECORD MODE is in the EACH MODE. QUAD Display, Enable / Disable theAuto switching function.
