Installation
Powering On/Off the Projector
Powering On the Projector
1.Remove the lens cap.
2.Ensure that the power cord and signal cable are securely connected. The Power LED will turn red.
3.Turn on the lamp by pressing “
” button on the control panel. And the Power LED will turn blue.
The startup screen will display in approximately 30 seconds. The first time you use the projector, you can select your preferred language from quick menu after the startup screen display.
English
4.Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically within “Setup” menu, check that “Source Lock” has been set to “Off”.
▀■If you connected multiple sources at the same time, press the “Source” button on the control panel or direct source key on the remote control to switch between inputs.
Note
Turn on the projector first and then select the signal sources.
1 | 2 |
13
