Optoma Technology 1080p DLP manual High Altitude, Auto Power Off, Signal

User Controls

High Altitude

Choose “On” to turn on High Altitude mode. Operates the fans at full speed continuously to allow for proper high altitude cooling of the projector.

Auto Power Off

Sets the interval of power-off of the system, if there is no signal input. (In minutes)

RGB Source HDTV Source Video Source

Signal

Note

“Signal” don’t support when source is HDMI or DVI-D.

Phase: Changes the display data frequency to match the fre- quency of your computer’s graphic card. When you experience a vertical flickering bar, use this function to make an adjustment.

Tracking : Synchronizes the signal timing of the display with the graphics card. If you experience an unstable or flickering image, use this function to correct it.

H Position: Adjusts the horizontal position.

V Position: Adjusts the vertical position.

White Level : Allow user adjust White Level when inputting S- Video or Video/CVBS signals.

Black Level : Allow user adjust Black Level when inputting S- Video or Video/CVBS signals.

Saturation : Adjusts a video image from black and white to fully saturated color. Press the to decrease the amount of color in the image. Press the to increase the amount of color in the im- age.

30