English
Appendices
Changing the lamp
Warning : Lamp compart- ment is hot! Allow it to cool down before changing lamp!
The projector will detect the lamp life itself. It will show you a warning message “Lamp is running out of standard lifetime. Be sure to replace the lamp as soon as possible.” When you see this message, change the lamp as soon as possible.
Make sure the projector has been cooled down for at least 30 minutes before changing the lamp.
4Lamp Changing Procedure:
1.Turn off the power to the projector by pressing the Power/Standby button.
2.Allow the projector to cool down at least 30 minutes.
3.Turn off the main power switch.
4. Disconnect the power cord.
5.Use screwdriver to remove the screw from the cover.Œ
6.Remove the cover.•
7.Remove the 3 screws from the lamp module.Ž
8.Pull out the lamp module.•
To replace the lamp module, reverse the previous steps.
21
43
Warning : To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.
24
