User Controls
SETUP Signal -RGB Source
NOTE
“Signal” is only supported in Ana- log VGA (RGB) signal.
Frequency
Change the display data frequency to match the frequency of your computer’s graphic card. Use this function only if the image ap- pears to flicker vertically.
Phase
Synchronize the signal timing of the display with the graphic card. If the image appears to be unstable or flickers, use this function to correct it.
H. Position
`` Press the ◄ to move the image left. `` Press the ► to move the image right.
V. Position
`` Press the ◄ to move the image down. `` Press the ► to move the image up.
Automatic
Automatically selects the signal. If you use this function, the Frequency and Phase items are grayed out, and if Signal is not automatic, the Frequency and Phase items will appear for user to manually tune and saved in settings after that for next time projec- tor turns off and on again.
English 40
