Optoma Technology HD33 manual Image has slanted sides, Image is reversed, Blurry double image

Appendices

Image has slanted sides:

`` If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen.

`` Use “Display-->V Keystone” from the OSD to make an adjust- ment.

Image is reversed

`` Select “System-->Projection” from the OSD and adjust the projection direction.

Blurry double image

`` Press “3D Format” button and switch to “Off” to avoid normal 2D image is blurry double image.

Two images, side-by-side format

`` Press “3D Format” button and switch to “SBS” for input signal is HDMI 1.3 2D 1080i side-by-side.

Image does not display in 3D

`` Check if the battery of 3D glasses is drained. `` Check if the 3D glasses is turned on.

`` When the input signal is HDMI 1.3 2D (1080i side-by-side half), press “3D Format” button and switch to “SBS”.

43 English