Optoma Technology HD81 manual Setup Settings, Signal

User Controls

Setup Settings

Signal

▪During the initial setup, adjustment of the color and image quality should be performed. After this initial setup is completed, the HD81 will automatically store the settings for optimal image viewing.

▪The HD81 OSD is dependent upon the video source signal. It has been designed to show a different OSD display with each input. Please refer to table A and B below for more details on available adjustments for each signal.

▪With the exception of the VGA and BNC connections, if the HD81 is not receiving a signal from the input source device, the OSD will only allow the System Setup module to be adjusted.

English

TABLE A	Composite	S-Video	RCA	BNC
	Video Decoder	Video Decoder	YPbPr	YPbPr	RGBsRGB
Type				Auto YPbPr, RGBs, RGB
Color Space			Auto, SDTV,	Auto, SDTV,
			HDTV	HDTV
Pedestal	0IRE, 7.5IRE	0IRE, 7.5IRE	0IRE, 7.5IRE	0IRE, 7.5IRE
Horizontal			-50~50	-50~50	-50~50
Vertical			-7~7	-7~7	-7~7
Frequency			-10~10	-10~10	-10~10
Phase			0~31	0~31	0~31
TABLE B		VGA		HDMI
	YPbPr		RGBsRGB
Type	Auto YPbPr, RGBs, RGB
Color Space	Auto, SDTV, HDTV			Auto, SDTV, HDTV
Pedestal	0IRE, 7.5IRE			DVI-PC, DVI-Video
Horizontal	-50~50		-50~50
Vertical	-7~7		-7~7
Frequency	-10~10		-10~10
Phase	0~31		0~31

* Grey color blanks stand for N/A.

Please exercise caution when adjusting the “Horizontal” and “Vertical” as this may cause the loss of your image if the values are set out of range. We recommend using this adjustment only if you cannot receive the input signal.

47