Optoma Technology Home Theatre Projector Powering On/Off the Projector, Powering On the Projector

￿nstallation

Powering On/Off the Projector

Powering On the Projector

1.Remove the lens cap.

2.Ensure that the (1) power cord for Projector and Box and

(2) HDMI To HDMI ,and RS-232 cable that are from Box to Projector signal cable, (3) Signal cable to Box are securely connected and turn on Main power switch on Box side. The Power LED will become red on Projector side and Box side.

3.Turn on the lamp by pressing “On/Standby” button either on the from of the Box or on the remote. The Power LED will turn blue on Box side and flash blue on Projector side.

The startup screen will display in approximately 30 seconds and the Power LED on projector side will show blue. The

first time you use the projector, you can select your pre- ferred language from quick menu after the startup screen display.

English

4.Turn on your source (computer, notebook, video player, etc.). Then choice the source that you feed to HD81-LV.

If you connected multiple sources at the same time, press the “Source” button on the control panel or direct source key on the remote control to switch between inputs.

Turn on the projec- tor first and then select the signal sources.

1	2
Lens Cap	Main Power Switch

21