ser ontrols
(*): When Ana- morphic Lens set as “Fixed” or “Movable”, the default format will become “Auto235” that replace original format “Native”. (See page 35)
Display Settings
Format
Use this function to choose your desired aspect ratio.
▪To match the input image to the correct aspect ratio, six modes can be selected: 16:9, 4:3, Native, LBX, Format 1, Format 2.
▪Default modes are 16:9, 4:3, Native and LBX.
4:3: This format is for 4x3 input sources not enhanced for Wide screen TV.
16:9: This format is for 16x9 input sources, like HDTV and DVD enhanced for Wide screen TV.
Native: This format displays the original image without any
LBX: This format is for
Detail information about LBX mode :
1)Some
One can use 4:3 mode to view the correct info.
But if the content itself is not 4:3, it will have black bars around the image in a 16:9 display. For this kind of content, you can use LBX mode to fill the image in the 16x9 display as much as possible.
2)If you use an external 16x9 lens, this LBX mode also allows you to watch a 2.35:1 content (include Anamorphic DVD and
HDTV film source) that support anamorphic wide is enhanced for 16x9 Display in a wide 2.35:1 image.
In this case, there are no black bars, the full lamp power and vertical resolution is fully utilized for maximum viewing effects.
Other than these two occasions, one should stay with 16:9 and 4:3 modes for most viewing experiences.
▪At this time, the exact aspect ratios for Format 1 and Format 2 have not been defined. For maximum flexibility, Format 1 are
16:9 mode and Format 2 is
▪User can also quickly select each mode from the remote control by pressing the “Display Format” button.
34